ATLAS Monitored Drift Tube Chambers in E = 11 MeV Neutron Background

The influence of fast neutrons on the occupancy and the single tube resolution of ATLAS muon drift detectors was investigated by exposing a chamber built out of 3 layers of 3 short standard drift tubes to neutron flux-densities of up to 16 kHz/cm2 at a neutron energy of E=11 MeV. Pulse shape capable NE213 scintillaton detectors and a calibrated BF3 neutron detector provided monitoring of the neutron flux-density and energy. The sensitivity of the drift chamber to the neutrons was measured to be 4*10-4 by comparing data sets with and without neutron background. For the investigation of tracks of cosmic muons two silicon-strip detectors above and underneath the chamber allow to compare measured drift-radii with reference tracks. Alternatively, the single tube resolution was determined using the triple-sum method. The comparison between data with and without neutron irradiation shows only a marginal effect on the resolution and little influence on the muon track reconstruction.Comment: 4 pages, 11 figures, conferenc

Z' Physics

The limits on extra neutral gauge bosons, which could be reached at LEP2, are reviewed. Exclusion and discovery limits are discussed for f\bar f and WW production.Comment: 20 pages Latex, 7 figures included by epsfig, Contribution to the Proceedings the workshop "Physics at LEP2", Geneva, 199

A Cosmic Ray Measurement Facility for ATLAS Muon Chambers

Monitored Drift Tube (MDT) chambers will constitute the large majority of precision detectors in the Muon Spectrometer of the ATLAS experiment at the Large Hadron Collider at CERN. For commissioning and calibration of MDT chambers, a Cosmic Ray Measurement Facility is in operation at Munich University. The objectives of this facility are to test the chambers and on-chamber electronics, to map the positions of the anode wires within the chambers with the precision needed for standalone muon momentum measurement in ATLAS, and to gain experience in the operation of the chambers and on-line calibration procedures. Until the start of muon chamber installation in ATLAS, 88 chambers built at the Max Planck Institute for Physics in Munich have to be commissioned and calibrated. With a data taking period of one day individual wire positions can be measured with an accuracy of 8.3 micrometers in the chamber plane and 27 micrometers in the direction perpendicular to that plane.Comment: 14+1 pages, 11 figures, contributed paper to the EPS2003 conference, Aache

Temperature Studies for ATLAS MDT BOS Chambers

Data sets with high statistics taken at the cosmic ray facility, equipped with 3 ATLAS BOS MDT chambers, in Garching (Munich) have been used to study temperature and pressure effects on gas gain and drifttime. The deformation of a thermally expanded chamber was reconstructed using the internal RasNik alignment monitoring system and the tracks from cosmic data. For these studies a heating system was designed to increase the temperature of the middle chamber by up to 20 Kelvins over room temperature. For comparison the temperature effects on gas properties have been simulated with Garfield. The maximum drifttime decreased under temperature raise by -2.21 +- 0.08 ns/K, in agreement with the results of pressure variations and the Garfield simulation. The increased temperatures led to a linear increase of the gas gain of about 2.1% 1/K. The chamber deformation has been analyzed with the help of reconstructed tracks. By the comparison of the tracks through the reference chambers with these through the test chamber the thermal expansion has been reconstructed and the result shows agreement with the theoretical expansion coefficient. As the wires are fixed at the end of the chamber, the wire position calculation can not provide a conclusion for the chamber middle. The complete deformation has been identified with the analysis of the monitoring system RasNik, whose measured values have shown a homogeneous expansion of the whole chamber, overlayed by a shift and a rotation of the chamber middle with respect to the outer part of the chamber. The established results of both methods are in agreement. We present as well a model for the position-drifttime correction as function of temperature.Comment: 4 pages, 12 figures, conferenc

First identification of large electric monopole strength in well-deformed rare earth nuclei

Excited states in the well-deformed rare earth isotopes $^{154}$Sm and $^{166}$Er were populated via ``safe'' Coulomb excitation at the Munich MLL Tandem accelerator. Conversion electrons were registered in a cooled Si(Li) detector in conjunction with a magnetic transport and filter system, the Mini-Orange spectrometer. For the first excited $0^+$ state in $^{154}$Sm at 1099 keV a large value of the monopole strength for the transition to the ground state of $\rho^2(\text{E0}; 0^+_2 \to 0^+_\text{g}) = 96(42)\cdot 10^{-3}$ could be extracted. This confirms the interpretation of the lowest excited $0^+$ state in $^{154}$Sm as the collective $\beta$-vibrational excitation of the ground state. In $^{166}$Er the measured large electric monopole strength of $\rho^2(\text{E0}; 0^+_4 \to 0^+_1) = 127(60)\cdot 10^{-3}$ clearly identifies the $0_4^+$ state at 1934 keV to be the $\beta$-vibrational excitation of the ground state.Comment: submitted to Physics Letters

Single Top Quark Production as a Probe for Anomalous Moments at Hadron Colliders

Single production of top quarks at hadron colliders via $gW$ fusion is examined as a probe of possible anomalous chromomagnetic and/or chromoelectric moment type couplings between the top and gluons. We find that this channel is far less sensitive to the existence of anomalous couplings of this kind than is the usual production of top pairs by $gg$ or $q\bar q$ fusion. This result is found to hold at both the Tevatron as well as the LHC although somewhat greater sensitivity for anomalous couplings in this channel is found at the higher energy machine.Comment: New discussion and 10 new figures added. uuencoded postscript fil

An analytical program for fermion pair production in e+e- annihilation

We describe how to use {\tt ZFITTER}, a program based on a semi-analytical approach to fermion pair production in e^+ e^- annihilation and Bhabha scattering. A flexible treatment of complete {\cal O}(\alpha) QED corrections, also including higher orders, allows for three calculational {\bf chains} with different realistic sets of restrictions in the photon phase space. {\tt ZFITTER} consists of several {\bf branches} with varying assumptions on the underlying hard scattering process. One includes complete {\cal O}(\alpha) weak loop corrections with a resummation of leading higher-order terms. Alternatively, an ansatz inspired from S-matrix theory, or several model-independent effective Born cross sections may be convoluted. The program calculates cross sections, forward-backward asymmetries, and for \tau~pair production also the final-state polarization. Various {\bf interfaces} allow fits to be performed with different sets of free parameters

Can We Observe Weak Anomalous Couplings of Heavy Quarks Through Three Jet Events?

The rates and corresponding jet distributions for the decay $Z\to b\bar bg$ and the process $e^+e^-\to t\bar tg$ may be sensitive to anomalous dipole-like couplings of heavy quarks to the photon and $Z$. In the $b$-quark case, after updating our previous analysis on the constraints imposed by current experiments on $Zb\bar b$ anomalous couplings, we show that the variation of these couplings within their presently allowed ranges leads to rather minor modifications to the Standard Model expectations for $Z\to b\bar bg$ observables. In the $t$-quark case, significant deviations from the Standard Model predictions for $t\bar tg$ production at the Next Linear Collider are possible.Comment: 26 pages with 9 embedded figures; gzipped, uuencoded postscript file. To obtain a copy of this paper send e-mail to [email protected]